派生自 ruleprocess
ruleserver/readyDataForRule.go
@@ -1,28 +1,32 @@ package ruleserver import ( "basic.com/pubsub/cache.git/esutil" bigCache "basic.com/pubsub/cache.git" "basic.com/pubsub/cache.git/esutil" "basic.com/pubsub/protomsg.git" "encoding/json" "fmt" "github.com/go-yaml/yaml" "io/ioutil" "math" "ruleprocess/cache" "ruleprocess/logger" "strconv" "time" ) var serverIp,serverPort,dbTablePersons string var serverIp, serverPort, dbTablePersons string type conf struct { PhotoUrl string `yaml:"photoUrl"` Videopersons string `yaml:"videopersons"` Personaction string `yaml:"personaction"` Serverip string `yaml:"serverIp"` Serverport string `yaml:"serverPort"` Dbtablepersons string `yaml:"dbTablePersons"` VideoPersons string `yaml:"videoPersons"` PersonAction string `yaml:"personAction"` ServerIp string `yaml:"serverIp"` ServerPort string `yaml:"serverPort"` DbTablePersons string `yaml:"dbTablePersons"` } func init() { func Init() { data, err := ioutil.ReadFile("./config/conf.yml") if err != nil { fmt.Println("读取配置文件出错--", err) @@ -31,61 +35,71 @@ c := conf{} //把yaml形式的字符串解析成struct类型 yaml.Unmarshal(data, &c) serverIp = c.Serverip serverPort = c.Serverport dbTablePersons = c.Dbtablepersons localConfig, err := cache.GetServerInfo() if err != nil { logger.Debug("配置文件的值为：", c) serverIp = c.ServerIp serverPort = c.ServerPort dbTablePersons = c.DbTablePersons localConfig, err1 := cache.GetServerInfo() if err1 != nil { logger.Error("查询本机信息失败！") } logger.Debug("本机信息：",localConfig) bigCache.Init(dbTablePersons,serverIp,serverPort,localConfig.ServerId) logger.Debug("本机信息和server信息：", localConfig, serverIp, serverPort) bigCache.Init(dbTablePersons, serverIp, serverPort, localConfig.ServerId) } type BaseInfo struct { TableId string `json:"tableId"` TableName string `json:"tableName"` BwType string `json:"bwType"` TableId string `json:"tableId"` TableName string `json:"tableName"` BwType string `json:"bwType"` CompareScore float64 `json:"compareScore"` PersonId string `json:"personId"` PersonName string `json:"personName"` PersonPicUrl string `json:"personPicUrl"` PhoneNum string `json:"phoneNum"` Sex string `json:"sex"` IdCard string `json:"idCard"` MonitorLevel string `json:"monitorLevel"` Content string `json:"content"` PersonId string `json:"personId"` PersonName string `json:"personName"` PersonPicUrl string `json:"personPicUrl"` PhoneNum string `json:"phoneNum"` Sex string `json:"sex"` IdCard string `json:"idCard"` MonitorLevel string `json:"monitorLevel"` Content string `json:"content"` } // 以摄像机id查出跟其相关的所有任务下的所有规则组 func GetRuleGroup(cameraId string,taskId string) *protomsg.TaskGroupArgs { func GetRuleGroup(cameraId string, taskId string) *protomsg.TaskGroupArgs { all := cache.GetCameraTaskRulesByCameraId(cameraId) //logger.Info("==================所有的任务的规则组：",all) var taskGroup *protomsg.TaskGroupArgs for _,task := range all { var taskGroup *protomsg.TaskGroupArgs for _, task := range all { if task.TaskId == taskId { taskGroup = task } } logger.Debug("当前数据帧要匹配的规则组：-------------------------") for _,ruleGroup := range taskGroup.GroupRules{ logger.Info(ruleGroup.GroupText) } return taskGroup } // 根据摄像机id拿到摄像机所有区域 func GetPolygons(cameraId string) []protomsg.CameraPolygon { var cameraPolygons []protomsg.CameraPolygon cameraPolygons = cache.GetPolygonsByCameraId(cameraId) logger.Debug("------=======查看下全部区域：",cameraPolygons) //logger.Debug("------=======查看下全部区域：",cameraPolygons) return cameraPolygons } // 保留四位小数 func Retain(f float32)(float32) { s:= strconv.FormatFloat(float64(f), 'f', 4, 64) v, err := strconv.ParseFloat(s, 32) if err != nil { logger.Error("保留四位小数转换错误") } return float32(v) func Retain(f float32) (float64) { value1, _ := strconv.ParseFloat(fmt.Sprintf("%.2f", float64(f)), 64) return value1 } func Decimal(value float32) float64 { value1, _ := strconv.ParseFloat(fmt.Sprintf("%.2f", float64(value)), 64) logger.Info("初步保留两位成str:",value1) n10 := math.Pow10(4) value2 := math.Trunc((value1+0.5/n10)*n10) / n10 logger.Info("初步保留两位成str::::",value2) return value2 } // 取出某个时间规则的第几天的规则段集合 func GetTimeById(id string, index int) []TimeRange { _, cameraTimeRule := cache.GetTimeRuleById(id) @@ -102,7 +116,6 @@ } return nil } // 根据传入的字符串得到其在一周内的索引 周一到周日分别对应1到7 func getIndexOfWeek(weekday string) int { @@ -127,7 +140,7 @@ // 将字符串格式的坐标序列化为Point格式 func Json2points(areaPoints string) []Point { var pts []Point if areaPoints == "[]" || areaPoints == ""{ if areaPoints == "[]" || areaPoints == "" { logger.Error("=====================此区域为全部区域") pts = append(pts, Point{0, 0}) pts = append(pts, Point{0, 540}) @@ -144,8 +157,8 @@ } // 给目标填充liker func (arg *Arg) fillLiker(tableId []string,compareThreshold float32) { bytes := bigCache.GetComparePersonBaseInfo(tableId,arg.Feature,compareThreshold) func (arg *Arg) fillLiker(tableId []string, compareThreshold float32) { bytes := bigCache.GetComparePersonBaseInfo(tableId, arg.Feature, compareThreshold) var m map[string]float32 err1 := json.Unmarshal(bytes, &m) if err1 != nil { @@ -153,42 +166,45 @@ } //logger.Info("----------------------------------------map是", m) ids := []string{} for key,_ := range m { ids = append(ids,key) for key, _ := range m { ids = append(ids, key) } logger.Info("------------------------------------------------------------------------------------------------------------------------") logger.Info("=====================人员id的集合为：",ids) //logger.Info("=====================人员id的集合为：",ids) if len(ids) > 0 { baseinfos, err1 := esutil.Dbpersoninfosbyid(ids,dbTablePersons,serverIp,serverPort) baseinfos, err1 := esutil.Dbpersoninfosbyid(ids, dbTablePersons, serverIp, serverPort) if err1 != nil { logger.Error("查询底库人员信息出错", err1) } logger.Debug("----------------++++++++++++++++++++底库人员信息：",baseinfos) for _,baseinfo := range baseinfos { for _, baseinfo := range baseinfos { // 根据tableId查询底库信息给liker赋值 logger.Info("---------看看每个底库人员的信息：",baseinfo.Id,baseinfo.PersonName) var tableIds []string tableIds = append(tableIds,baseinfo.TableId) // 虽然是传入数组返回数组的接口，但我按单个的使用了 table,err := esutil.Dbtablefosbyid(tableIds,dbTablePersons,serverIp,serverPort) if err != nil { logger.Error("根据id查询底库信息出错！") //logger.Info("---------看看每个底库人员的信息：",baseinfo.Id,baseinfo.PersonName) tableIds := []string{} tableIds = append(tableIds, baseinfo.TableId) // 虽然是传入数组返回数组的接口，但我按单个的使用了 table, err := esutil.Dbtablefosbyid(tableIds, "dbtables", serverIp, serverPort) if err != nil || len(table) == 0 { logger.Error("根据id查询底库信息出错！", err, "--返回值长度为：", len(table)) } base := BaseInfo{TableId:baseinfo.TableId,TableName:table[0].TableName,BwType:table[0].BwType,CompareScore:float64(m[baseinfo.Id]),PersonId:baseinfo.Id,PersonName:baseinfo.PersonName,PersonPicUrl:baseinfo.PersonPicUrl,PhoneNum:baseinfo.PhoneNum,Sex:baseinfo.Sex,MonitorLevel:baseinfo.MonitorLevel,Content:""} logger.Debug("看看这个base的对比值是多少：", Decimal(m[baseinfo.Id] * 100)) base := BaseInfo{TableId: baseinfo.TableId, TableName: table[0].TableName, BwType: table[0].BwType, CompareScore: Decimal(m[baseinfo.Id] * 100), PersonId: baseinfo.Id, PersonName: baseinfo.PersonName, PersonPicUrl: baseinfo.PersonPicUrl, PhoneNum: baseinfo.PhoneNum, Sex: baseinfo.Sex, IdCard: baseinfo.IdCard, MonitorLevel: baseinfo.MonitorLevel, Content: baseinfo.Reserved} //os.Exit(1) arg.Liker = append(arg.Liker, &base) } } } // 人脸比对 func Compare(args *SdkDatas, groupRule *protomsg.GroupRule) { compareFlag := 0 var tableIds []string var threshold float32 var threshold float32 = 0.5 // 默认阈值为0.5 // 看看是否有只配人脸比对算法但没有配对比库的规则，如果有，则比对对象为全部底库 for j := 0; j < len(groupRule.Rules); j++ { if groupRule.Rules[j].SdkId == "812b674b-2375-4589-919a-5c1c3278a972" { // 配了人脸比对 if groupRule.Rules[j].SdkArgAlias == "compareBase" && groupRule.Rules[j].SdkArgValue != "" { // 配了比对底库的参数但没有配全部底库 if groupRule.Rules[j].SdkArgAlias == "compareBase" && groupRule.Rules[j].SdkArgValue != "" { // 配了比对底库的参数但不是配的全部底库 compareFlag = 2 tableIds = append(tableIds,groupRule.Rules[j].SdkArgValue)// 最后会多一个tableId，切出来的数组取len-1就可以 tableIds = append(tableIds, groupRule.Rules[j].SdkArgValue) // 最后会多一个tableId，切出来的数组取len-1就可以 } if groupRule.Rules[j].SdkArgAlias == "compareBase" && groupRule.Rules[j].SdkArgValue == "" { // 配的参数是比对全部底库 compareFlag = 1 @@ -208,32 +224,33 @@ logger.Info("没有配置对比底库参数") return } logger.Debug("=====配置的阈值为：", threshold) for j := 0; j < len(groupRule.Rules); j++ { if groupRule.Rules[j].SdkId == "812b674b-2375-4589-919a-5c1c3278a972" { for _, sdkData := range args.Sdkdata { if sdkData.IpcId == "A8B73405-373D-4F23-CED2-A617EBD7EC55" { // 搜索到人脸检测的sdkdata 现在关于人脸的只有他一个sdk，全找他 logger.Info("============================================进行人脸对比") for _, areaMap := range sdkData.AreaMapList { logger.Info("-------------人脸比对之前目标数量",len(areaMap.args)) // 拿区域中每个人脸特征值去对比，填充其liker if groupRule.Rules[j].PolygonId == areaMap.areaId { logger.Info("--------------看看compareFlag的值：",compareFlag) //logger.Info("--------------看看compareFlag的值和tableId和areaMap.args的长度：",compareFlag,tableIds,len(areaMap.args)) for _, arg := range areaMap.args { if compareFlag == 1 { arg.fillLiker(nil,threshold) arg.fillLiker(nil, threshold) } if compareFlag == 2 { arg.fillLiker(tableIds,threshold) arg.fillLiker(tableIds, threshold) } logger.Info("-------------------成功给liker赋值,长度为：", len(arg.Liker)) //logger.Info("-------------------成功给liker赋值,长度为：", len(arg.Liker)) } areaMap.filterData = areaMap.args //logger.Info("=======第一次看args：",(areaMap.filterData)) } logger.Info("-------------------------------人脸对比之后的目标数量",len(areaMap.args)) //logger.Info("-------------------------------人脸对比之后的目标数量",len(areaMap.args)) } } } return // 比完一次就出去，防止再比第二遍造成重复，因为确实可以有两个人脸比对的小规则，一个底库，一个阈值 } } } @@ -254,12 +271,13 @@ if threshold <= obj.Score && size <= float64(obj.Rects.Width*obj.Rects.Height) && intersectionper <= PgsInterPercent(areaPoints, obj.Rects, widthScale, heigthScale) { // 这步要备齐表达式里所需要的所有参数 a.targetNum++ arg1 := Arg{obj.Score, PgsInterPercent(areaPoints, obj.Rects, widthScale, heigthScale), float64(obj.Rects.Width * obj.Rects.Height), obj.IsYolo, obj.Rects, obj.Feature, obj.ThftRes, []*BaseInfo{}} arg1 := Arg{obj.Id,obj.Score, PgsInterPercent(areaPoints, obj.Rects, widthScale, heigthScale), float64(obj.Rects.Width * obj.Rects.Height), obj.IsYolo, obj.Rects, obj.Feature, obj.ThftRes, []*BaseInfo{}} //logger.Println("放进去的arg：-------", arg1) a.args = append(a.args, &arg1) a.filterData = append(a.filterData, &arg1) } } logger.Info("区域是：",areaPoints,"区域内目标数量为：",a.targetNum,"---",len(a.filterData)) a.time = time.Unix(time.Now().Unix(), 0).String()[11:16] a.keepRight = arg.KeepRight a.isStatic = arg.IsStatic @@ -279,4 +297,4 @@ areaMap.CountAreaObjs(arg) arg.AreaMapList = append(arg.AreaMapList, &areaMap) } } }
